Installing the βSocket Mobile Companionβ app and setting up your scanner via this app resolves many issues for S700 / S720 scanners (the newer S721 is set up inside Material POS instead, see below): https://apps.apple.com/us/app/socket-mobile-companion/id1175638950
Which setup applies to my scanner?
Starting with Material POS version 2.87, the app has a new Settings β Scanner screen. How you connect a scanner depends on the model. Only the new SocketScan S721 uses the new in-app process. Nothing changes for older scanners.
Scanner | How it connects | What to do |
SocketScan S721 (new, Bluetooth Low Energy) | Inside the Material POS app | Follow Connect a SocketScan S721 below. No Companion app and no iPad Bluetooth pairing needed. |
SocketScan S700 / S720 and other older Socket scanners (Bluetooth Classic) | Socket Mobile Companion app and the iPad's Bluetooth settings | Follow Connect the Scanner to the iPad (S700 / S720) below. This process has not changed. |
Already using an S700 or S720? You don't need to do anything. A scanner that is already paired keeps working after the app update and does not need to be paired again.
Connect a SocketScan S721
The S721 is not paired from the iPad's Bluetooth settings. You connect it once from inside Material POS, and the app remembers it.
- Update Material POS from the App Store to version 2.87 or later.
- Make sure Bluetooth is turned on on the iPad. If the iPad asks whether Material POS may use Bluetooth, tap Allow.
- Turn on the scanner: hold the power button until the scanner beeps twice. Keep it near the iPad.
- In Material POS, open Settings and tap Scanner.
- Under Add a Scanner, tap Search next to SocketScan S721 (Bluetooth LE). A list opens with the title "Looking for scanners...".
- Tap your scanner when it appears in the list. The search runs for a few seconds, then the title changes to "Select scanner".
- The scanner now shows under Connected Scanners.
- To test it, go to Checkout and scan a product barcode that is already in your inventory. The product is added to the cart, or you see "Product not found" if the barcode is not in your inventory.
The scanner reconnects on its own the next time you open the app. You only need to do these steps once per iPad.
Using the S721 with a Magic Dock
- Connect the Magic Dock to the iPad with its USB-C cable.
- Place the scanner on the dock and follow the scan-to-connect step in the guide that came with the dock.
- Open Settings β Scanner in Material POS and check that the scanner shows under Connected Scanners. If it does not, tap Search and pick it from the list.
To use the scanner and dock with a different iPad, plug the dock's USB-C cable into that iPad.
Moving or removing an S721
- Open Settings β Scanner on the iPad the scanner is connected to.
- Under Connected Scanners, tap Forget next to the scanner.
- On the new iPad, follow the Connect a SocketScan S721 steps above.
Always tap Forget before moving a scanner to another iPad. Otherwise the first iPad reconnects to it whenever the app is open nearby.
S721 troubleshooting
- "No scanners found", or your scanner is not in the list: check that the scanner is on, charged, and close to the iPad, then close the list and tap Search again.
- The scanner was used with another iPad: tap Forget on that iPad first, or close Material POS on it, then search again.
- "Scanner not connected" message: turn the scanner off and on, keep it next to the iPad, and tap Search again.
- There is no Scanner option in Settings: update Material POS to version 2.87 or later.
Connect the Scanner to the iPad (S700 / S720)
These steps are for the SocketScan S700, S720 and other older Bluetooth Classic scanners. They are the same as before. Do not use them for the S721.
Once the scanner is paired, it also shows under Connected Scanners in Settings β Scanner (version 2.87 or later). For step 6, you can tap Pair next to SocketScan S720 (Bluetooth Classic) on that screen to open the Bluetooth picker without leaving the app. The scanner still has to be put into iOS / app mode first (steps 3 to 5).
- Turn off Bluetooth from general settings on the iPad
- Turn on Scanner: Hold the small button until the LED light blinks in blue, and the scanner will beep twice.
- Open the socket mobile companion app.
- Select device type on the menu
- Scan the barcode on the iPad screen to enable iOS mode. The scanner will beep when the mode-change is successful.
- Turn on the Bluetooth and look for the barcode scanner to connect.
- Your scanner should be ready to go. To test whether it works correctly or not, open the Shoptiques POS on your iPad and scan a product barcode that is already in the database.
- Scanning the product should automatically add the product to the shopping cart or will get a popup message saying "Product not found" if the product is not found.
Video
If the above fails, try resetting your device and re-pairing it with these instructions: Go to the general settings of the iPad.
- Go to the bluetooth menu find Socket S700 device.
- Click the i in the circle next to the device, then tap on Forget This Device.
- After you have forgotten the device, turn OFF your iPad bluetooth.
- Open the Socket Mobile Companion App on your iPad. You should have it installed from when you were first set up with Shoptiques POS, however, if the app has been deleted, click HERE to download the app.
- On the Socket App click Add New Device.
- Select the Socket Scan 700 series scanner (Navy Blue Picture)
- Confirm that the bluetooth is turned off on your iPad. Then Click the Next Arrow.
- Scan the barcode on the iPad screen to enable app mode. If the barcode won't scan on the iPad, try printing out the barcode and scanning that way. Then click Next.
- If the device successfully goes in to App Mode, you should hear 3 beeps from the scanner, sounding similar to R2-D2.
- Then go back to the bluetooth menu and turn back on bluetooth.
- Once bluetooth is re-enabled, connect your scanner to bluetooth. If the scanner successfully pairs, it will move to your devices list and show a status of connected.
- You are now ready to start scanning!
General Tips
These tips apply to all Socket Mobile scanners unless a step says otherwise.
- Only use the original rechargeable batteries that the scanner came with. If you need replacement batteries, make sure to order NiMH rechargeable batteries that fit your scanner.
- Only use the original charger cable, dock or stand that came with your scanner. Other cables may fit, but may not charge the device correctly.
- Do not charge from a computer USB port. Plug the charging cable into a USB power adapter which is plugged directly into a wall outlet.
- S700 / S720 / CHS 7Ci only: Make sure the scanner is in "Application Mode". To do this, first make sure your scanner is NOT CONNECTED to any device (the easiest way to do this is to turn off Bluetooth on your iPad), and then scan the following command barcode. The S721 is always in Application Mode, so skip this step for an S721.
- Before first use, charge the scanner for a full 8 hours.
- S700 / S720 / CHS 7Ci only: If you're still having trouble, we recommend that you download the free Socket Mobile Companion app from the Apple App Store and follow the instructions to reset your device to factory settings and ensure it is in Application Mode. For an S721, use the S721 troubleshooting steps above instead.
Which model do I have?
Device Information:
- S721
- How to purchase: See Supported Hardware. This is the model we recommend for new purchases.
- Where is the user manual: SocketScan 700 Series User Guide
- How to set up: Inside the Material POS app. See Connect a SocketScan S721 above.
- S700
- How to purchase: We recommend purchasing from the Amazon purchase page
- Where is the user manual: Download here
- The command barcodes: Command barcodes can be used to configure certain optional settings of your scanner. You usually don't need to modify any of these. Download here
- CHS 7Ci
- How to purchase: We don't recommend purchasing the 7Ci model anymore as it is outdated. If you are purchasing a new scanner, we recommend that you purchase the S721 model above.
- Where is the user manual: Download here
- The command barcodes: Command barcodes can be used to configure certain optional settings of your scanner. You usually don't need to modify any of these. Download here
