Setting Up The Printer

1. Remove bottom cover on printer
2. Plug power cord into bottom of the printer and the other end into the wall
3. Plug ethernet cord into the bottom on the printer directly across from the power cord (has a photo of a cash drawer next to it) (Only if using bluetooth cashdrawer - skip otherwise)
4. Feed wires through the side of the printer and replace the bottom cover
5. Turn printer over and make sure it is powered off (no lights on)
6. Confirm that paper is in the printer
   • HOW TO LOAD PAPER:
     • On the top of the printer, you'll see a gray lever on the lower right corner. Lift the lever upwards.
     • Insert the receipt paper and then close the top.
7. Press and hold the Feed button on the top right and press the power button. Do not release the Feed button until printing starts.
8. If done correctly, the printer should spit out a receipt with device information on it

iPad Set Up

1. After printing device information, open POS app on the iPad.
2. Go to settings in the left hand menu and navigate to 'Printer'.
3. On the printed receipt paper, locate where it says "BD_ADDR" under Bluetooth.
4. Enter the value associated with it into the "Device Address" field. (Make sure to include the colons).
5. Click the green "Save Changes" button.
6. Click on the General tab under the Settings options.
7. Find the "Receipts" section. Here, you will be able to add your boutique logo and special text on your receipts. (This is optional)
8. Exit the POS app and navigate to the general settings of the iPad.
9. Under the Bluetooth menu in 'New Devices' select 'tm-M30' and connect it via bluetooth